The DLT-20C Blaster Rifle conversion kit for M4s is our easiest to assemble kit yet- with low parts count and thick walled pieces, it's also a very tough design, ideal for newer players. It can fit on to any standard style M4 AEG with a 14.5in barrel, leaving room for tracer units up to 34.5mm in diameter (including the T238 LITE R&G Tracer unit). Shorter barrels and longer tracers can be used, provided the tracer and barrel combo is under 16.5in from the front of the upper receiver (420mm). Custom lengths from 280 to 499mm are also available! A Steel Barrel Nut is provided, as well as an elongated scope mount that connects the barrel to the upper. The barrel is secured to the barrel nut via an 8mm set screw and the scope mount, to prevent rotation.
Scope kits, receiver greeblies, and stocks are available separately, to allow for ultimate customization. The Red Dot scope center sits at 1.74in height over the receiver for a comfortable and familiar "Lower 1/3" aiming height, and takes CR2032 batteries. Current models feature a Circle Dot reticle and are very bright for daylight use. An optional front end cap for the scope is included for a more screen accurate look and protection for the lens against BB hits. The front shroud and scope rings are available separately, for user-supplied 30mm tube scopes.
The DLT-20C stock fits on to standard AEG receivers, and replaces the buffer tube or fixed stock. Stock tangs up to 24mm long are supported, though longer ones are easily cut down without issues. The stock is of fixed length (11in Length of Pull) and features a removable buttplate for generous battery storage, as well as an integrated sling slot. Side plates are attached with 8 M3 screws and removable for easy painting and finishing. (A Buffer Tube version is now available for GBBRs or extended length of pull)
The greeblie bracket can be glued or bolted to the lower receiver for more secure installation, helping to change the silhouette and cover up receiver markings and logos. Top tube greeblie includes picatinny rail fillers, and must be glued on to the upper receiver.